The ignition coil is an important component of a car. It converts power of a few volts from the battery into as much as 25kv which is essential to create a spark to ignite fuel. Optimal functionality of the ignition coil is affected by multiple factors. You can extend the life of the coil up to 80,000 km by following a few tips. Read this article to know more about how you can extend the life of the ignition coil.

Battery should be well charged

Make sure to charge the battery optimally. If it is below optimal level, the workload on the coil is unlikely to create sufficient spark to ignite fuel.

Check for oil leaks

Check if there is any damaged sealant. This condition may lead to the leakage of oil. Often, oil damages the insulation in wires and exposes them. This causes sparks and rules out coil ignition.

Prevent formation of moisture

Look out for any breakages where the ignition coil is located. Make sure you seal such cracks with an adhesive. This prevents moisture from entering into the system.

Avoid engine overheating

In summer, the climate is hot and you may like to sit in your car with the air-conditioner on. Running the air-conditioner puts excess workload on the engine. The engine component gets hotter and hotter. Unless the heat is facilitated to move out from the engine, it might cause excess heat. This heat may reduce the durability of the ignition coil.

Limit vibrations

Occasionally, you may get a knocking noise that is unusual. Such noise is an indication of damage of the part where it comes from. If the noise becomes frequent, it damages the housing. It might also lead to short-circuit in the coil and ultimately failure.

READ  Dirt Bike Parts and Accessories

Maintenance of spark plugs

Over time, spark plugs wear because of workload. Get the spark plugs replaced as recommended by the manufacturer. While replacing spark plugs, see that the cylinder head threads and spark plug threads are free from moisture, dust and debris. Make sure to follow maintenance of the coil as recommended by the manufacturer.

Proper maintenance of engine parts

It is important that you take proper care of the engine parts. For this, you need to use engine oil of the right grade and appropriate fuel. You should also replace air filters, fuel injection pump, spark plugs and use right level of coolant (it should be between ‘high’ and ‘low’).

Make sure to replace the belts (in driving the pulleys) in the engine (replace them at 80,000 km), and get the vehicle serviced by expert professionals. Also, for optimal fuel economy, inflate tires to pressure recommended by the manufacturer.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Have you got a question? Write to us!
Have you got a question? Write to us!
:
:
:
Have you got a question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad